Concrete Wall Waterproof Resin Mortar Repair Material C006 Gray 4kg

※Image is a stock photo for illustrative purposes.

※Although the product is new and unused, there may be some minor dirt or damage due to the nature of the product.

Apply with a brush for excellent waterproofing ?

New, unused, unopened

Manufacturer: Asahipen
Product Name: Waterproof Resin Mortar Repair Material for Concrete Walls
Color: Gray
2kg x 2, total 4Kg

Features
● This is a resin mortar repair material that can easily waterproof concrete wall surfaces.
● It can be applied with a brush for easy application.

Uses
For simple waterproofing of indoor and outdoor concrete, mortar, brick, and other wall surfaces.

[How to Use]
● Remove any deteriorated parts of the area to be repaired, and clean off dirt, debris, oil, etc.
● Cracks and holes should be pre-repaired with cement or other suitable material. Ensure any water leakage is properly stopped.
● Thoroughly moisten the area to be repaired with water using a spray bottle or sponge.
● Add water to a mixing container, then add the powder while stirring with a stick or similar tool. Mix thoroughly from the bottom of the container. For wall surface repairs, use approximately 330-350ml of water per 1kg of this product.
● Apply with a waterproof resin mortar brush (sold separately). Aim for a thickness of about 0.5mm. Be careful, as applying too thickly may cause cracking.
● Apply at least two coats. Reapply after at least 3 hours in summer, 5 hours in standard conditions, and 18 hours in winter.
※Pot life is approximately 30 minutes (at 20°C). Work quickly within the pot life after mixing the powder and water.

Materials/Ingredients
Portland cement, aggregate, resin
pH: Alkaline

Curing Time
[Touch Dry]
Standard conditions (20°C) / Approx. 2 hours
Summer (30°C) / Approx. 1 hour
Winter (5°C) / Approx. 3 hours