Expanded Metal XF32 Tatami Pattern A4 Size Set of 2

Expanded Metal XF32, Iron
Diamond Pattern

Flat Type Mesh Material
Size: 2 x A4 Sheets

Looking for a small quantity for DIY projects?

While it might be a matter of preference, we believe the flat type is easier to handle for cutting, processing, welding, etc., compared to the standard raised type.

It can add a rugged look to plant shelves or trays.
Rust can be reduced by applying one coat of rust inhibitor and two coats of topcoat with appropriate paint.

The basic size is A4, but custom sizes are also available.
(Please allow for approximately ±3mm variation as we cut at convenient mesh points.)

If you require a custom size, please contact us in advance.
We will provide a quote including shipping and create a dedicated listing for you.

Thank you for viewing our page.

*The edges have been lightly chamfered after cutting, but please handle with care.

We recommend using protective gloves such as leather gloves (leather gloves are recommended over work gloves) when handling.

Please understand that we are not responsible for any injuries or problems that may occur due to the edges.

Also, please note that as this is an iron product, some rust may be present.
This product is intended for surface treatment such as painting or oil finishing.
If used as-is, rust will inevitably appear due to humidity, even without direct water contact.